Free Help Setting up Your Router or Firewall Set up your router from home
Home Guides GameRails Store Support Forum Requests
see list of routers and firewalls below

Port Forwarding for the Zoom X4 5551


What is Port Forwarding?
What is Port Triggering?




 

Before we can forward ports for ActiveWebCam, we need to figure out what ports ActiveWebCam++ is using. Here is a brief walkthrough on how to do that. Go ahead and open up ActiveWebCam and get into the camera you want to modifies settings.



At the top of the camera's properties page click the Broadcasting link.



There are two things on this page that require forwarding a port. If you have Remote Access enabled, you need to forward the port in the remote accesses section's Port box. You can change the port that is in that box if you like. Please enter the port for Remote Access into the box below. If you are not using Remote Access just leave this box blank.

ActiveWebCam's port for remote access



The HTTP Server is the second thing in Active WebCam that requires port forwarding. The Port box in the Http Server section contains the port number that must be forwarded for the HTTP Server. You can change that port number if you like. Please enter the port you are using for the HTTP Server into the box below. If you are not using the HTTP Server just leave this box blank.

ActiveWebCam's port for the HTTP Server

To setup port forwarding on this router your computer needs to have a static ip address. Take a look at our Static IP Address guide to setup a static ip address. When you are finished setting up a static ip address, please come back to this page and enter the ip address you setup in the Static IP Address box below.

Do not skip this step!




Open a web browser like internet explorer or Netscape. Enter the ip address of your router in the address bar of your browser. In the picture above the address bar has http://www.google.com in it. Just replace all of that with the ip address of your router. By default the ip address should be set to 10.0.0.2.




You should see a box prompting you for your username and password. Enter your username and password now. By default the username is admin, and the password is zoomadsl. Click the Ok button to log in to your router.




Click the Advanced Setup button near the top of the page.




Click the NAT button near the center of the page.




Select NAT Option from the NAT Rule Entry drop down box.


Click the Add button near the bottom of the page.




Nat Rule Information
Rule Flavor:     
Rule ID:     
IF Name:     
Protocol:     
Local Address From:     
Local Address To:     
Global Address From:     
Global Address To:     
Destination Port From:        
Destination Port To:        
Local Port:        

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Active Webcam requires you to forward the ports you entered above. Go ahead and enter the settings shown above into the NAT Rule - Add menu and then click Save Changes.

Nat Rule Information
Rule Flavor:     
Rule ID:     
IF Name:     
Protocol:     
Local Address From:     
Local Address To:     
Global Address From:     
Global Address To:     
Destination Port From:        
Destination Port To:        
Local Port:        

You should see another page of settings that need to be entered into one of the blank lines on your routers NAT Rule - Add page. Go ahead and enter those settings and then click Save Changes.

Click the Advanced Setup button near the top of the page.

Click the IP Filter button near the center of the page.




Select None from the Security Level drop down box. Select Accept from the Public Default Action, Private Default Action and DMZ Default Action drop down box.

And that is it! You are done!