Free Help Setting up Your Router or Firewall Set up your router from home
Router List Port List Port Checker Other Guides Game Guides Store Support Forum
see list of routers and firewalls below

Port Forwarding Far Cry on the Vonage VWR-11.4.0


What is Port Forwarding?
What is Port Triggering?


 



Open a web browser like internet explorer or Netscape. Enter the ip address of your router in the address bar of your browser. In the picture above the address bar has http://www.google.com in it. Just replace all of that with the ip address of your router. By default the ip address should be set to 192.168.15.1.




You should see a box prompting you for your username and password. Enter your username and password now. By default both the username and password are user. Click the Ok button to log in to your router.




Click the Advanced button near the top of the page.




Put a dot into the User radio button.


Click the New button near the bottom of the page.




We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Far Cry requires you to forward the 49001-49002,49124 ports. Go ahead and enter the settings shown above into the Rule Management menu and then click Apply.

Rule Name:
Protocol:
Port Start: Port End:
Port Map:

You should see another page of settings that need to be entered into one of the blank lines on your routers Rule Management page. Go ahead and enter those settings and then click Apply.

Rule Name:
Protocol:
Port Start: Port End:
Port Map:



Select the applications you just created in the Available Rules list, then click the Add button to move them to the Applied Rules box.

When you're finished, click Apply near the bottom of the screen to save your changes.

And that's it! You're done!



To test if your port has been properly forwarded, you can use our Port Checker tool.