To setup port forwarding on this router your computer needs to have a static ip address. Take a look at our Static IP Address guide to setup a static ip address. When you are finished setting up a static ip address, please come back to this page and enter the ip address you setup in the Static IP Address box below.

Open a web browser like internet explorer or Netscape. Enter the ip address of your router in the address bar of your browser. In the picture above the address bar has http://www.google.com in it. Just replace all of that with the ip address of your router. By default the ip address should be set to 10.0.0.138.

Click the NAPT button near the left side of the page.

Click the New link near the center of the page.

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. eJamming Station requires you to forward the 26900 ports. Go ahead and enter the settings shown above into the NAPT menu and then click Apply.

You should see another page of settings that need to be entered into one of the blank lines on your routers NAPT page. Go ahead and enter those settings and then click Apply.

When you're finished, click Save All near the left side of the screen to save your changes.

And that's it! You're done!