Before we can forward ports for Skype, we need to figure out what port Skype is using. Here is a brief walkthrough on how to do that. Go ahead and open up Skype.

Click Tools in the menu at the top of your screen. In the list that drops down click Options.

In the menu on the left hand side of this new page click the Connection option. You should now see the menu shown in the screenshot above. The number in the Use Port for incoming Connections box contains the port you need to forward. You can change the port number, if you want to. Please enter the port you chose into the box below.

To setup port forwarding on this router your computer needs to have a static ip address. Take a look at our Static IP Address guide to setup a static ip address. When you are finished setting up a static ip address, please come back to this page and enter the ip address you setup in the Static IP Address box below.

Open a web browser like internet explorer or Netscape. Enter the ip address of your router in the address bar of your browser. In the picture above the address bar has http://www.google.com in it. Just replace all of that with the ip address of your router. By default the ip address should be set to 192.168.0.1.

You should see a box prompting you for your username and password. Enter your username and password now. By default the username is admin, and the password is password. Click the Ok button to log in to your router.

Please visit our default username and passsword page, if the username and password shown above did not work for you.

Click the Port Forwarding link near the left of the page.

Click the Add Custom Service button near the bottom of the page.

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Skype requires you to forward the ports you entered above. Go ahead and enter the settings shown above into the Custom Services menu and then click Add.

And that is it! You are done!