To setup port forwarding on this router your computer needs to have a static ip address. Take a look at our Static IP Address guide to setup a static ip address. When you are finished setting up a static ip address, please come back to this page and enter the ip address you setup in the Static IP Address box below.

Open a web browser like internet explorer or Netscape. Enter the ip address of your router in the address bar of your browser. In the picture above the address bar has http://www.google.com in it. Just replace all of that with the ip address of your router. By default the ip address should be set to 192.168.0.1.

You should see a box prompting you for your username and password. Enter your username and password now. By default the username is admin, and the password is password. Click the Ok button to log in to your router.

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Battlefield 2 requires you to forward the 80,1500-4999,16567,18060,27900-27901,28910,29900-29901,29910,29920,55123-55124,55215 ports. Go ahead and enter the settings shown above into the Add New Port Forwarding Rule menu and then click Apply.

Click Security near the top of the screen. You should then see a new menu under Security, in this new menu click Services. You should now be on the following screen.

On this screen, click the Add Custom Service link near the bottom.

Go ahead and enter the above settings into your router. When you're finished, click Apply near the bottom.

Now we need to tell your router what to do with the service you just created. Click the Firewall Rules link near the top of the page. You should now be on the following screen.

On this page, click Add in the Inbound Services or Outbound Services section. If you are unsure if the program you are using will use these ports for inbound or outbound traffic, repeat the process for both inbound and outbound.

Go ahead and enter the above settings into your router. When you're finished, click Apply near the bottom.

You should see another page of settings that need to be entered into one of the blank lines on your routers Add New Port Forwarding Rule page. Go ahead and enter those settings and then click Apply.

Click Security near the top of the screen. You should then see a new menu under Security, in this new menu click Services. You should now be on the following screen.

On this screen, click the Add Custom Service link near the bottom.

Go ahead and enter the above settings into your router. When you're finished, click Apply near the bottom.

Now we need to tell your router what to do with the service you just created. Click the Firewall Rules link near the top of the page. You should now be on the following screen.

On this page, click Add in the Inbound Services or Outbound Services section. If you are unsure if the program you are using will use these ports for inbound or outbound traffic, repeat the process for both inbound and outbound.

Go ahead and enter the above settings into your router. When you're finished, click Apply near the bottom.

You should see another page of settings that need to be entered into one of the blank lines on your routers Add New Port Forwarding Rule page. Go ahead and enter those settings and then click Apply.

Click Security near the top of the screen. You should then see a new menu under Security, in this new menu click Services. You should now be on the following screen.

On this screen, click the Add Custom Service link near the bottom.

Go ahead and enter the above settings into your router. When you're finished, click Apply near the bottom.

Now we need to tell your router what to do with the service you just created. Click the Firewall Rules link near the top of the page. You should now be on the following screen.

On this page, click Add in the Inbound Services or Outbound Services section. If you are unsure if the program you are using will use these ports for inbound or outbound traffic, repeat the process for both inbound and outbound.

Go ahead and enter the above settings into your router. When you're finished, click Apply near the bottom.

You should see another page of settings that need to be entered into one of the blank lines on your routers Add New Port Forwarding Rule page. Go ahead and enter those settings and then click Apply.

Click Security near the top of the screen. You should then see a new menu under Security, in this new menu click Services. You should now be on the following screen.

On this screen, click the Add Custom Service link near the bottom.

Go ahead and enter the above settings into your router. When you're finished, click Apply near the bottom.

Now we need to tell your router what to do with the service you just created. Click the Firewall Rules link near the top of the page. You should now be on the following screen.

On this page, click Add in the Inbound Services or Outbound Services section. If you are unsure if the program you are using will use these ports for inbound or outbound traffic, repeat the process for both inbound and outbound.

Go ahead and enter the above settings into your router. When you're finished, click Apply near the bottom.

You should see another page of settings that need to be entered into one of the blank lines on your routers Add New Port Forwarding Rule page. Go ahead and enter those settings and then click Apply.

Click Security near the top of the screen. You should then see a new menu under Security, in this new menu click Services. You should now be on the following screen.

On this screen, click the Add Custom Service link near the bottom.

Go ahead and enter the above settings into your router. When you're finished, click Apply near the bottom.

Now we need to tell your router what to do with the service you just created. Click the Firewall Rules link near the top of the page. You should now be on the following screen.

On this page, click Add in the Inbound Services or Outbound Services section. If you are unsure if the program you are using will use these ports for inbound or outbound traffic, repeat the process for both inbound and outbound.

Go ahead and enter the above settings into your router. When you're finished, click Apply near the bottom.

You should see another page of settings that need to be entered into one of the blank lines on your routers Add New Port Forwarding Rule page. Go ahead and enter those settings and then click Apply.

Click Security near the top of the screen. You should then see a new menu under Security, in this new menu click Services. You should now be on the following screen.

On this screen, click the Add Custom Service link near the bottom.

Go ahead and enter the above settings into your router. When you're finished, click Apply near the bottom.

Now we need to tell your router what to do with the service you just created. Click the Firewall Rules link near the top of the page. You should now be on the following screen.

On this page, click Add in the Inbound Services or Outbound Services section. If you are unsure if the program you are using will use these ports for inbound or outbound traffic, repeat the process for both inbound and outbound.

Go ahead and enter the above settings into your router. When you're finished, click Apply near the bottom.

You should see another page of settings that need to be entered into one of the blank lines on your routers Add New Port Forwarding Rule page. Go ahead and enter those settings and then click Apply.

Click Security near the top of the screen. You should then see a new menu under Security, in this new menu click Services. You should now be on the following screen.

On this screen, click the Add Custom Service link near the bottom.

Go ahead and enter the above settings into your router. When you're finished, click Apply near the bottom.

Now we need to tell your router what to do with the service you just created. Click the Firewall Rules link near the top of the page. You should now be on the following screen.

On this page, click Add in the Inbound Services or Outbound Services section. If you are unsure if the program you are using will use these ports for inbound or outbound traffic, repeat the process for both inbound and outbound.

Go ahead and enter the above settings into your router. When you're finished, click Apply near the bottom.

You should see another page of settings that need to be entered into one of the blank lines on your routers Add New Port Forwarding Rule page. Go ahead and enter those settings and then click Apply.

Click Security near the top of the screen. You should then see a new menu under Security, in this new menu click Services. You should now be on the following screen.

On this screen, click the Add Custom Service link near the bottom.

Go ahead and enter the above settings into your router. When you're finished, click Apply near the bottom.

Now we need to tell your router what to do with the service you just created. Click the Firewall Rules link near the top of the page. You should now be on the following screen.

On this page, click Add in the Inbound Services or Outbound Services section. If you are unsure if the program you are using will use these ports for inbound or outbound traffic, repeat the process for both inbound and outbound.

Go ahead and enter the above settings into your router. When you're finished, click Apply near the bottom.

You should see another page of settings that need to be entered into one of the blank lines on your routers Add New Port Forwarding Rule page. Go ahead and enter those settings and then click Apply.

Click Security near the top of the screen. You should then see a new menu under Security, in this new menu click Services. You should now be on the following screen.

On this screen, click the Add Custom Service link near the bottom.

Go ahead and enter the above settings into your router. When you're finished, click Apply near the bottom.

Now we need to tell your router what to do with the service you just created. Click the Firewall Rules link near the top of the page. You should now be on the following screen.

On this page, click Add in the Inbound Services or Outbound Services section. If you are unsure if the program you are using will use these ports for inbound or outbound traffic, repeat the process for both inbound and outbound.

Go ahead and enter the above settings into your router. When you're finished, click Apply near the bottom.

You should see another page of settings that need to be entered into one of the blank lines on your routers Add New Port Forwarding Rule page. Go ahead and enter those settings and then click Apply.

Click Security near the top of the screen. You should then see a new menu under Security, in this new menu click Services. You should now be on the following screen.

On this screen, click the Add Custom Service link near the bottom.

Go ahead and enter the above settings into your router. When you're finished, click Apply near the bottom.

Now we need to tell your router what to do with the service you just created. Click the Firewall Rules link near the top of the page. You should now be on the following screen.

On this page, click Add in the Inbound Services or Outbound Services section. If you are unsure if the program you are using will use these ports for inbound or outbound traffic, repeat the process for both inbound and outbound.

Go ahead and enter the above settings into your router. When you're finished, click Apply near the bottom.

You should see another page of settings that need to be entered into one of the blank lines on your routers Add New Port Forwarding Rule page. Go ahead and enter those settings and then click Apply.

Click Security near the top of the screen. You should then see a new menu under Security, in this new menu click Services. You should now be on the following screen.

On this screen, click the Add Custom Service link near the bottom.

Go ahead and enter the above settings into your router. When you're finished, click Apply near the bottom.

Now we need to tell your router what to do with the service you just created. Click the Firewall Rules link near the top of the page. You should now be on the following screen.

On this page, click Add in the Inbound Services or Outbound Services section. If you are unsure if the program you are using will use these ports for inbound or outbound traffic, repeat the process for both inbound and outbound.

Go ahead and enter the above settings into your router. When you're finished, click Apply near the bottom.

You should see another page of settings that need to be entered into one of the blank lines on your routers Add New Port Forwarding Rule page. Go ahead and enter those settings and then click Apply.

Click Security near the top of the screen. You should then see a new menu under Security, in this new menu click Services. You should now be on the following screen.

On this screen, click the Add Custom Service link near the bottom.

Go ahead and enter the above settings into your router. When you're finished, click Apply near the bottom.

Now we need to tell your router what to do with the service you just created. Click the Firewall Rules link near the top of the page. You should now be on the following screen.

On this page, click Add in the Inbound Services or Outbound Services section. If you are unsure if the program you are using will use these ports for inbound or outbound traffic, repeat the process for both inbound and outbound.

Go ahead and enter the above settings into your router. When you're finished, click Apply near the bottom.

You should see another page of settings that need to be entered into one of the blank lines on your routers Add New Port Forwarding Rule page. Go ahead and enter those settings and then click Apply.

Click Security near the top of the screen. You should then see a new menu under Security, in this new menu click Services. You should now be on the following screen.

On this screen, click the Add Custom Service link near the bottom.

Go ahead and enter the above settings into your router. When you're finished, click Apply near the bottom.

Now we need to tell your router what to do with the service you just created. Click the Firewall Rules link near the top of the page. You should now be on the following screen.

On this page, click Add in the Inbound Services or Outbound Services section. If you are unsure if the program you are using will use these ports for inbound or outbound traffic, repeat the process for both inbound and outbound.

Go ahead and enter the above settings into your router. When you're finished, click Apply near the bottom.

You should see another page of settings that need to be entered into one of the blank lines on your routers Add New Port Forwarding Rule page. Go ahead and enter those settings and then click Apply.

Click Security near the top of the screen. You should then see a new menu under Security, in this new menu click Services. You should now be on the following screen.

On this screen, click the Add Custom Service link near the bottom.

Go ahead and enter the above settings into your router. When you're finished, click Apply near the bottom.

Now we need to tell your router what to do with the service you just created. Click the Firewall Rules link near the top of the page. You should now be on the following screen.

On this page, click Add in the Inbound Services or Outbound Services section. If you are unsure if the program you are using will use these ports for inbound or outbound traffic, repeat the process for both inbound and outbound.

Go ahead and enter the above settings into your router. When you're finished, click Apply near the bottom.

And that is it! You are done!