To setup port forwarding on this router your computer needs to have a static ip address. Take a look at our Static IP Address guide to setup a static ip address. When you are finished setting up a static ip address, please come back to this page and enter the ip address you setup in the Static IP Address box below.

Open a web browser like internet explorer or Netscape. Enter the ip address of your router in the address bar of your browser. In the picture above the address bar has http://www.google.com in it. Just replace all of that with the ip address of your router. By default the ip address should be set to 192.168.1.1.

You should see a box prompting you for your password. Enter your password now. By default your password is admin. Click the Ok button to log in to your router.

Click the Applications & Gaming link near the top of the page.

This router has two different sections that allow you to forward ports. One section allows you to forward a range of ports, and the other allows you to forward a single port. To forward a range of ports, click Port Range Forwarding. To forward a single port, click Single Port Forwarding.

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. radmin - Remote Administrator requires you to forward the 4899 ports. Go ahead and enter the settings shown above into the Single Port Forwarding or Port Range Forwarding menu.

When you're finished, click Save Settings near the bottom of the screen to save your changes.

And that's it! You're done!