Before we can forward ports for ActiveWebCam, we need to figure out what ports ActiveWebCam++ is using. Here is a brief walkthrough on how to do that. Go ahead and open up ActiveWebCam and get into the camera you want to modifies settings.
At the top of the camera's properties page click the Broadcasting link.
There are two things on this page that require forwarding a port. If you have Remote Access enabled, you need to forward the port in the remote accesses section's Port box. You can change the port that is in that box if you like. Please enter the port for Remote Access into the box below. If you are not using Remote Access just leave this box blank.
To setup port forwarding on this router your computer needs to have a static ip address. Take a look at our Static IP Address guide to setup a static ip address. When you are finished setting up a static ip address, please come back to this page and enter the ip address you setup in the Static IP Address box below.
Open a web browser like internet explorer or Netscape. Enter the ip address of your router in the address bar of your browser. In the picture above the address bar has http://www.google.com in it. Just replace all of that with the ip address of your router. By default the ip address should be set to 192.168.1.1.
You should see a box prompting you for your username and password. Enter your username and password now. By default both the username and password are admin. Click the Ok button to log in to your router.
Click the Applications & Gaming link near the top of the page.
You should now see a new menu. In this new menu, click Single Port Forwarding or Port Range Forwarding.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Active Webcam requires you to forward the ports you entered above. Go ahead and enter the settings shown above into the Single Port Forwarding or Port Range Forwarding menu.
You should see another page of settings that need to be entered into one of the blank lines on your routers Single Port Forwarding or Port Range Forwarding page. Go ahead and enter those settings now.
When you're finished, click Save Settings near the bottom of the screen to save your changes. And that's it! You're done!
