Free Help Setting up Your Router or Firewall Set up your router from home
Router List Port List Port Checker Other Guides Game Guides Store Support Forum
see list of routers and firewalls below

Port Forwarding Utorrent on the Inca AR7WRD


What is Port Forwarding?
What is Port Triggering?


 

Before we can forward ports for Utorrent, we need to figure out what ports Utorrent is using. Here is a brief walkthrough on how to do that. Go ahead and open up Utorrent.



Click Options in the menu at the top of your screen. In the list that drops down click Preferences.



Click Connections on the left hand side of the Utorrent program. You should now see the menu shown in the screenshot above. Make sure the Enable UPnP box is unchecked. The number in the Port Used for Incoming Connections box contains the port you need to forward. You can change the port number, if you want to. Please enter the port you chose into the box below.

Utorrent's Port for incoming connections

To setup port forwarding on this router your computer needs to have a static ip address. Take a look at our Static IP Address guide to setup a static ip address. When you are finished setting up a static ip address, please come back to this page and enter the ip address you setup in the Static IP Address box below.

Do not skip this step!




Open a web browser like internet explorer or Netscape. Enter the ip address of your router in the address bar of your browser. In the picture above the address bar has http://www.google.com in it. Just replace all of that with the ip address of your router. By default the ip address should be set to 192.168.1.1.




You should see a box prompting you for your username and password. Enter your username and password now. By default the username is admin, and the password is admin. Click the Giriž button to log in to your router.




Click the Gelismis button near the top of the page.

The menu on the left should change. In this new menu, click Port Yonlendirme.


Put a dot into the User radio button. Click the Yeni button.


We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Utorrent requires you to forward the ports you entered above. Go ahead and enter the settings shown above into the Kural Yonetimi menu and then click Uygula.

Rule Name :    
Protocol :    
Port Start : Port End :
Port Map :    



Select the applications you just created in the Uyguna Kurallar list, then click the Ekle > button to move them to the Uygulanan Kurallar box. When you are finished, click the Uygula button.

And that is it! You are done!



To test if your port has been properly forwarded, you can use our Port Checker tool.