Free Help Setting up Your Router or Firewall Set up your router from home
Router List Port List Port Checker Other Guides Game Guides Store Support Forum
see list of routers and firewalls below

Port Forwarding HTTP on the Dlink DSL-504T


What is Port Forwarding?
What is Port Triggering?





Open a web browser like internet explorer or Netscape. Enter the ip address of your router in the address bar of your browser. In the picture above the address bar has http://www.google.com in it. Just replace all of that with the ip address of your router. By default the ip address should be set to 192.168.1.1.




You should see a box prompting you for your username and password. Enter your username and password now. By default both the username and password are admin. Click the Ok button to log in to your router.

Please visit our default username and passsword page, if the username and password shown above did not work for you.




Click the Advanced link near the top of the page.

The menu on the left should change. In this new menu, click Port Forwarding.


Put a dot into the User radio button.


Click the Add button near the bottom of the page.




We will list a series of lines here that will show you exactly how to forward the ports you need to forward. HTTP requires you to forward the 80 ports. Go ahead and enter the settings shown above into the Rule Managment menu and then click Apply.

Rule Name    
Protocol    
Port Start Port End
Port Map    



Select the applications you just created in the Available Rules list, then click the Add > button to move them to the Applied Rules box.

When you're finished, click Apply near the bottom of the screen to save your changes.

And that's it! You're done!



To test if your port has been properly forwarded, you can use our Port Checker tool.