Free Help Setting up Your Router or Firewall Set up your router from home
Home Guides Reviews Store Support Forum Requests
see list of routers and firewalls below

Port Forwarding for the Actiontec MI-424-WRv2


What is Port Forwarding?
What is Port Triggering?




 

Before we can forward ports for UltraVNC, we need to figure out what ports UltraVNC is using. Here is a brief walkthrough on how to do that. Go ahead and open up UltraVNC and get into the Admin Properties.



In the Incoming Connections area you should see a Ports Main and Ports Http boxes. The Ports Main box lets you specify the port that will be used when you use a VNC Viewer to connect to the server. The Ports Http box lets you specify the port that will be used when you use a web browser to connect to the server. If you want to change the ports go ahead and do so. Then enter those ports into the boxes below.

Please enter the port you chose for the Ports Main box into the box below.

UltraVNC Ports Main box



Please enter the port you chose for the Ports Http box into the box below.

UltraVNC Ports Http box

To setup port forwarding on this router your computer needs to have a static ip address. Take a look at our Static IP Address guide to setup a static ip address. When you are finished setting up a static ip address, please come back to this page and enter the ip address you setup in the Static IP Address box below.

Do not skip this step!




Open a web browser like internet explorer or Netscape. Enter the ip address of your router in the address bar of your browser. In the picture above the address bar has http://www.google.com in it. Just replace all of that with the ip address of your router. By default the ip address should be set to 192.168.1.1.




You should see a box prompting you for your username and password. Enter your username and password now. By default the username is admin, and the password is password. Click the Ok button to log in to your router.

Click the Firewall Settings button near the top of the page.




Click the Port Forwarding link near the left side of the page.




Click the Add link near the center of the page.




Enter the ip address to forward these ports to into the Network Computer / Device box. If you are forwarding ports so you can run a program on your computer, you should enter your computer's ip address into that box.

Click the Protocol Add link near the right side of the page.




Enter the name of the program into the Service Name box. It doesn't really matter what you put into this box, but something that will remind you why these ports are being forwarded would be a good idea.

Click the Protocol Add Server Ports link near the center of the page.




Protocol
Source Ports:
Destination Ports:

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. UltraVNC requires you to forward the ports you entered above. Go ahead and enter the settings shown above into the Port Forwarding menu.

Protocol
Source Ports:
Destination Ports:

You should see another page of settings that need to be entered into one of the blank lines on your routers Port Forwarding page. Go ahead and enter those settings now.

Protocol
Source Ports:
Destination Ports:

You should see another page of settings that need to be entered into one of the blank lines on your routers Port Forwarding page. Go ahead and enter those settings now.

Protocol
Source Ports:
Destination Ports:

You should see another page of settings that need to be entered into one of the blank lines on your routers Port Forwarding page. Go ahead and enter those settings now.

When you are finished, click the Apply button.


When you're finished, click Apply near the bottom of the screen to save your changes.

And that's it! You're done!