To setup port forwarding on this router your computer needs to have a static ip address. Take a look at our Static IP Address guide to setup a static ip address. When you are finished setting up a static ip address, please come back to this page and enter the ip address you setup in the Static IP Address box below.

Open a web browser like internet explorer or Netscape. Enter the ip address of your router in the address bar of your browser. In the picture above the address bar has http://www.google.com in it. Just replace all of that with the ip address of your router. By default the ip address should be set to 192.168.10.1.

You should see a box prompting you for your username and password. Enter your username and password now. By default the username is admin, and the password is 1234. Click the Ok button to log in to your router.

Click the NAT link near the top of the page.

The menu on the left should change. In this new menu, click Port Mapping.

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. BlackSite - Area 51 requires you to forward the 6777,7777-7797,30660 ports. Go ahead and enter the settings shown above into the Port Mapping menu.

When you're finished, click OK near the bottom of the screen to save your changes.

And that's it! You're done!