Free Help Setting up Your Router or Firewall Set up your router from home
Home Guides Reviews Store Support Forum Requests
see list of routers and firewalls below

Firewalling for the NVidia ActiveArmor Firewall






 

After opening ports for BomberMan Online be sure to select the UDP - On option like shown in the menu below.



I've heard of and experienced this firewall causing "out of memory" errors with some programs. Just be aware of that when using this firewall. Go ahead and open up the Nvidia ActiveArmor Firewall.


Click the View the current Profile link.


In the main section of this page change the Security Profiles to one of the custom configurations. Put a dot in to the Re-generate profile based on radio button. I chose medium here, but you can choose any of the profiles to base your custom profile off of. Then click the Apply button at the bottom of this page. You should see a status page as the firewall generates the custom configuration settings. When it is finished you should find yourself back at the Firewall Basic Configuration Page. Now click the Firewall link on the left hand side of this page. Then click the Advanced Configuration link. Then click the UDP/TCP Port link in the left hand menu.


The default TCP/UDP port inbound action drop down box should be set to deny. Click the Add button on the bottom of this page. Then enter the settings as shown below.
UDP/TCP Port - Add Rule
Name
 
Any Remote IP Address
Specify Remote IP address and/or mask
Remote IP Address
Remote IP subnet mask
 
Beginning Port Number {min 0, max 65535}
 
Ending Port Number {min 0, max 65535}
 
Port Protocol
 
TCP/UDP port inbound action
 
TCP/UDP port outbound action
 
 
Click the Apply button to save that rule. That should be it. The firewall should be properly configured.