Before we can open ports for BitTorrent, we should set the ports that BitTorrent uses. Here is a brief walkthrough on how to do that. Go ahead and open up BitTorrent.

In the menu at the top of your screen, click the View link. Then in the list of options that drops down click the Settings option.

A new window should have poped up that looks like the picture above. There are a few tabs at the top of this window, click the Network tab.

The number in the starting at port box tells BitTorrent where you start looking for open ports. BitTorrent works it's way up from that port number until it finds a port that is open. Every port that BitTorrent has to check takes time. So it would be a good idea to open the port that you enter into the Starting at Port box. Many ISPs block ports in the 6000 range. Please choose a port between 10000 and 60000 then enter it into the Starting at Port box. Then enter that port into the box below.

If you plan on downloading multiple files at the same time via BitTorrent, you need to open up one port for each file. This guide will show you how to open up one port for each file. If you chose to put port 12540 into the Starting at Port box and wanted to have five files going at the same time, you should open ports 12540 to 12544.

To configure this router's firewalling properly you should setup a static ip address on your computer. Take a look at our Static IP Address guide to setup a static ip address. When you are finished setting up a static ip address, please come back to this page and enter the ip address you setup in the Static IP Address box below.

Open a web browser like internet explorer or Netscape. Enter the ip address of your router in the address bar of your browser. In the picture above the address bar has http://www.google.com in it. Just replace all of that with the ip address of your router. By default the ip address should be set to 192.168.0.1.

You should see a box prompting you for your username and password. Enter your username and password now. By default the username is admin, and the password is blank. Click the Ok button to log in to your router.

Click the Advanced button near the top of the page.

The menu on the left should change. In this new menu, click Firewall.

And that is it! You are done!