Free Help Setting up Your Router or Firewall Set up your router from home
Home Guides Reviews Store Support Forum Requests
see list of routers and firewalls below

Firewalling for the BullGuard Personal Firewall






 

Before we can open ports for 360Share, we need to figure out what port 360Share is using. Here is a brief walkthrough on how to do that. Go ahead and open up 360Share.



Click Tools in the menu at the top of your screen. In the list that drops down click Options.



In the menu at the left hand side of your screen double click the Advanced option. Clicking Advanced, should drop down a couple more options. In this new list of options click the Firewall Config option. Put a dot into the Manual Port open radio button. The port you need to open is in the box to the right of the Manual Port open text. You can change this port if you want to. Just keep in mind that whatever port is in the Manual Port open box, should also be in the Listen On Port box. Then click the Apply button at the bottom of the page.

Please enter the number that was in the Manual Port open box into the box below.

360Share's Port for incoming connections

Open up 360Share.


You might see a window pop up like the one above. If you do, put a check mark in to the Remember my answer and don't ask again checkbox. Then click the Yes button. Doing this allows all traffic in and out of your network for that program. Now we will show you how to limit what ports are allowed for that application. Go ahead and open up BullGuard now.


Click the Firewall button near the left hand side of the page.




On this page you will see a User Level drop down box. Make sure that it is set to Advanced. Then click the Profiles tab at the top of the screen.


Double click the Custom Security button.


Now click the Security tab at the top of this window.


Make sure there is a checkmark in the Detect Modified Applications checkbox. Then click on the Application Rules tab at the top of the window.


You should see an entry for 360Share in this table. If you see more than one entry for this application, delete the others so that there is only one entry. It is currently set to allow all traffic for this program. Change the Direction drop down box from In + Out to Incoming and click the OK button at the bottom of the page.


Another window should pop up for 360Share. Once again put a check mark in to the Remember my answer and don't ask again checkbox.Then click the Yes button at the bottom of that window. Now go back to BullGuard.


Double click the Custom Security button.


You should now see two rules for 360Share in this table. One of those rule's Direction should be set to Incomming. The other rule's Direction would be set to In + Out. Change this second rule's Direction to Outgoing. Now we have two rules for 360Share. One of them will regulate the incoming traffic and the other one will regulate the outgoing traffic. Double click the Ports... drop down box for the Incoming rule.
  
Ports
  Local Ports:
    
 
  Remote Ports:
  
Click the Ok button to save those changes. Then click the Ok button on the Custom Security page. Now 360Share should be restricted to only the ports it requires.